The maintenance and maintenance of Xuchang chike stainless steel soaking and ironing machine are as follows:
1. The scalding machine should be drained of water and cleaned thoroughly every day to keep the body clean inside and outside to prevent bacterial contamination of the poultry body.
2. Clean and check the float valve every day to ensure the sensitive action of the water level control system and timely replace the failed water level controller.
3, regularly clean and replace the vortex air pump intake mesh filter.
Fault analysis and troubleshooting:
1. Air leakage, air leakage at the joint of each pipe, rubber and asbestos plate sealing the part above the water surface and food rubber plate sealing the part below the water surface, re-tighten the joints, pipe thread sealing with polyethylene raw materials.
2. The air volume of the vortex air pump is insufficient. Check whether there is air leakage at the connection of each air pipe, and deal with it again after finding it.
3, temperature instability, temperature is the main reason of the unstable hanging poultry uneven or intermittent it, should be reasonable or even just because the water temperature in the poultry body to enter a period of time is poultry body heat and falling, by this time steam temperature will be a lot of compensation, the water rose, if the chain has quite a period of no poultry body can cause water temperature fluctuates up and down, so to homogeneous continuous hanging chickens.
